Simkits User Forum
 
Home Help Search Login Register
09/10/10 at 03:21:41
Welcome, Guest. Please Login or Register

News: The SimKits forum is a meeting place for users of SimKits products and people who are interested to communicate with existing SimKits users. It is not controlled by SimKits and is not monitored by SimKits Support to reply on technical or product questions. When you have questions on products please send an email directly to support@simkits.com.
SimKits Forum › Tech Forum › SimKits Hardware (Moderator: Forum Admin) ‹ Previous Topic | Next Topic ›
Pages: 1
Send Topic Print
737 Flaps Gauge (Read 446 times)
andreotti60






Posts: 13
Gender: male
737 Flaps Gauge
02/24/10 at 02:16:38  
Gentlemen:
Can someone tell me if the Simkits 737 Flaps Gauge fits in the Engravity Desktop Center MIP?  I would like to use the gauge as is without modifications but I'm not sute the bezel would fit in the hole.  Maybe someone has tried it?  Alternatively, I would welcome the measurements of the gauge and I can check myself.  

Thanks.  Gianluca
Back to top
 
 
View Profile   IP Logged
andreotti60






Posts: 13
Gender: male
Re: 737 Flaps Gauge
Reply #1 - 02/27/10 at 04:00:44  
Please, one at the time, gentlemen.  Don't rush to respond all at once!  Smiley
Back to top
 
 
View Profile   IP Logged
curt
Admin





Posts: 1440
Gender: male
Re: 737 Flaps Gauge
Reply #2 - 02/27/10 at 17:04:20  
Hi Gianluca,

Here are the panel cut-outs, I hope this helps:


Cheers, Curt.
Back to top
 
 
View Profile WWW   IP Logged
andreotti60






Posts: 13
Gender: male
Re: 737 Flaps Gauge
Reply #3 - 02/27/10 at 18:18:44  
Perfect.  Thanks!

Gianluca
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
SimKits Forum › Tech Forum › SimKits Hardware (Moderator: Forum Admin) ‹ Previous Topic | Next Topic ›

SimKits Forum » Powered by YaBB 2.2.3!
YaBB © 2000-2008. All Rights Reserved.