Servo driven aircraft gauge especially designed for flight simulation
This kit contains all parts to build either one large or one small aircraft gauge with one or two pointers of different shape out of the following parts: 1 large front ring, 1 small front ring, 1 large optical, 1 small optical, 1 housing, 1 set of screws, bolts and nuts, all the different pointers you will ever need, 1 set of adhesive pointer legends, 74 different faceplates.
This new kit replaces a number of different gauge kits offered before.
Since the gauge is equipped with its own microprocessor no CCU is necessary anymore and you can give the gauge up to 64 identities by setting a dip switch to build even the largest aircraft panel! It connects directly to your PC!
With this kit you can build any gauge out of the following gauge groups:
Airspeed Indicators
Vertical Speed Indicators
Engine Instruments
Airliner Instruments
Helicopter Instruments
The unique stand-alone gauge kit enables you to build any aircraft gauge, small or large, single or dual pointer.
Note: If you like us to build a gauge for you from this kit, then choose "Build the Aircraft Gauge for me with 1 servo!" or "Build the Aircraft Gauge for me with 1 servo!" and tell us by separate email which faceplate to use (see list below).
All high quality plastic injection molded parts which fit exactly. No special tools needed, no glue needed.
Includes 74 faceplates (30 large, 44 small) and all necessary parts: pointers, gears, screws, bolts, nuts, housing, opticals, electronics. Just everything included to build one small or one large gauge.
As there are no special tools or glue required to assemble this gauge. The gauge can easliy be disassembled at any time to change the faceplate for another model or even to use your own designed faceplate. The estimated assembly time is only 20 minutes!
- High Quality (all injection molded parts)
- Very Realistic
- Connects via USB (USB cable included) (USB version only)
- Single and Dual pointers
- Small and Large model
- Built-in lighting ) (USB version only)
- Controlled by Servo(s)*
- Easy to build in 20 minutes
- 74 Interchangeable faceplates
- Build one out of 74 different models
- You can even create your own faceplate!
- Dedicated Micro Processor Controller included ) (USB version only)
- Connects to Microsoft Flight Simulator FS2002, FS2004 and FSX
You can download the Construction Manual in PDF format
here.
(We recommend to rightclick and download the manual first prior to opening)
You can download the Software User Manual in PDF format
here.
(We recommend to rightclick and download the manual first prior to opening)
* The servo(s) are not included in this kit. Depending on if you want to build a single or a dual pointer gauge, you will need to order one or two standard servos here:
List of Faceplates included in the USB Aircraft Gauge kit:
737 APU for Overhead Panel
737 Cabin Climb
737 Cabin Temp Ctrl. C
737 Cabin Temp. Ctrl F
737 Crew Oxygen
737 Diff Pressure ALT Cabin Gauge
737 Duct Pressure
737 Flaps Gauge
737 Fuel Temp C
Airspeed Indicator 172
Airspeed Indicator 172
Airspeed Indicator 450 Knots Airliner
Airspeed Indicator Beechcraft Baron
Airspeed Indicator Bell 206B
Airspeed Indicator C182
Airspeed Indicator Cessna Caravan
Airspeed Indicator Extra 300S
Airspeed Indicator F16
Airspeed Indicator Mooney Bravo
Airspeed Indicator R44
Airspeed Indicator Schweizer Sailplane
Airspeed Indicator Sopwith Camel
Airspeed Indicator Voight Corsair
Bell 206B Vertical Speed Indicator
Bell Engine Oil Gauge
Bell Fuel Quantity Gauge
Bell Gas Producer (Note: small pointer is for illustration only)
Bell Load Fuel Gauge
Bell Rotor Power Torque Gauge
Bell Torque Percent Gauge
Bell XMSN Oil Gauge
Carburator Heat R22
Cirrus R-20/22 EGT/CHT
Cirrus R-20/22 Man. Pr./Fuel Fl.
Cirrus R-20/22 Volt/AMP
Cirrus SR-20/22 Oil Temp/Press
Cirrus SR-20/22 RPM
Cirrus SR-20/22 RPM
EGT/Fuel Flow Indicator C172
F16 Cabin Press ALT
F16 EPU FUEL
F16 FTIT
F16 Fuel
F16 Hyd
F16 NOZ POS
F16 Oil
F16 RPM
Fuel Flow Beechcraft Baron
Fuel Gauge Beechcraft Baron
Fuel Indicator Left/Right C172
Instrument Air Beechcraft Baron
Instrument Air Dual Engine
Manifold Press Beech Baron
Manifold Pressure - Vaught Corsair
Manifold Pressure General
Oil Temp. & Oil Press Gauge C172
Oil Temp/Pressure Beech Baron
R22 Airspeed Indicator
R22/R44 Engine Rotor RPM Gauge
R22/R44 Manifold Pressure Gauge
Suction Gauge/Ammeter C172
Tachometer Beechcraft Baron
Tachometer Cessna 172
Tachometer Cessna 182
Tachometer Sopwith Camel
Temp CHT EGT Beechcraft Baron
Turbine Temperature Out1 Gauge
Turbine Temperature Out2 Gauge
Vertical Speed Indicator - Beechcraft Baron 58
Vertical Speed Indicator Bell 206B
Vertical Speed Indicator C172/C182
Vertical Speed Indicator C172/C182
Vertical Speed Indicator Cessna Caravan
Vertical Speed Indicator Voight Corsair
Commercial / training use
The price level of this product is for private use only. When used for commercial applications or training use (or any other use than personal / private by one person) an additional license fee is required.
The purchase of one license fee is required for each single instrument used in applications other than personal/private and can be
purchased here:
When the commercial license fee is purchased, the warranty on a built product is extended to 2 years
Difficulty level of the kit
The kit can be constructed without technical expertise. However, care and accuracy are of utmost importance. No special tools are needed. You can build this gauge using standard workbench tools.
Build it for me
When you like us to build the product for you, then you need to order the product plus the additional cost to build the instrument for you. Then our engineers will assemble the gauge for you, test it for one hour and you will also receive a warranty of one year (see also our general conditions).
When ordering a built gauge, please specify from the list above the type of gauge our engineers need to build and put this in the comment field of your order.
Please make sure when you order the assembly of this product you purchase the"
Built it for me with 1 servo or
Built it for me with 2 servos.
If you purchase the 4-pack of discounted gauges and want to have all of them build, then you will need to purchase 4 x the cost to build them.
