SIMKITS - Software Centre

This section contains all downloadable software to control the CCU, the RSC, the SIC or the Multi Controller. Please download the software and install as required. It is highly recommended to read the instructions prior to installing any software! Simkits offers now now over 16 Megabyte of software and the software is free for download and to be used with Simkits hardware.!
Note: To control the Simkits hardware from Microsoft Flight Simulator 2004, FSUIPC3.xx is necessary.
To control the Simkits hardware from Microsoft Flight Simulator FSX, FSUIPC4.xx is necessary.
The new series individually USB controlled gauges do not need any third party software to be controlled from FSX.

TRC1000 Glass Cockpit Software This software interfaces the knobs and rotaries of the TRC1000 glass cockpit modules with Microsoft FSX	Size 580 Kb
TRC1000 Screen Cab File This .cab file adds the TRC 1000 to your gauges folder to be used in your panel. To install the TRC G1000 screen, unzip the G1000cab.zip and put the G1000.cab file in your gauges folder which can be found here: C:/Program Files/Microsoft Games/Microsoft Flight Simulator X/Gauges/ (note, please rename your original files for future use before placing this cab file in the gauges folder)	Size 580 Kb
SetupTRC1000KeySend.zip The TRC1000 Key Send Software makes it possible to assign custom keystrokes to every function of the TRC 1000 Complete Glass Cockpit (including the audio panel) for use with 3rd party G1000 software like Mindstar G1000.	Size 1,9 Mb
TRC500 GPS Software The TRC500 GPS Software connects the TRC500 to Microsoft 2004 and Microsoft FSX.	Size 73 Kb
TRC500 Screen Cab File for use with the TRC Cessna 172 Airplane This .cab file adds the TRC 500 to your gauges folder to be used in your panel. To install the TRC500 screen, unzip the fs9gpscab.zip and put the fs9gps.cab file in your gauges folder which can be found here: C:/Program Files/Microsoft Games/Microsoft Flight Simulator X/Gauges/ (note, please rename your original files for future use before placing this cab file in the gauges folder)	Size 222 Kb
USB Digital Clock Software The USB Digital Clock Software connects the USB Digital Clock to Microsoft 2004 and Microsoft FSX.	Size 675 Kb
Simkits USB Aircraft Gauge setup This is an automatic setup for the calibration and software for the Simkits USB Aircraft Gauge, Attitude Indicator, Turn & Bank Indicator, Key Lock Starter switch, TRC472 Switches, Light regulator ) ) A single light regulator can be read by the G Gauges software and the complex gauges software at the same time. It contains the software to drive the instruments from Microsoft Flight Simulator 2002, 2004 (FSUIPC needed) or Flight Simulator X Deluxe Version (FSUIPC not needed) and the software to calibrate the gauges. It has been updated from the previous version to support Windows Vista 32-bit and 64-bit and contains the value for a G-Force gauge. This version number is 1.25 and the date of release is May 26, 2010.	Size 2153 Kb
TRCUSBFsLink18.zip (for the complex USB gauges) Latest version: 1.8 (released 1 October 2009). This zipfile contains the driver software for the new, more complex USB instruments and connects the instruments to either Microsoft Flight Simulator 2004 (FS9) using FSUIPC3.xx or directly to Microsoft FSX using Microsoft's Simconnect (automatic recognition of Flight Simulator version). The software supports the USB Devices Light Reg (for the include gauges) ), Trimwheel, Gear Switch, Flaps, ADF, HDG, VOR1, VOR2, Wet Compass, Warning panel, Altimeter. ) A single light regulator can be read by the General Gauges software and the complex gauges software at the same time. It contains the software to drive the instruments from Microsoft Flight Simulator 2002, 2004 (FSUIPC needed) or Flight Simulator X Deluxe Version (FSUIPC not needed) and the software to calibrate the gauges. The software supports Windows Vista 32-bit and 64-bit. New in this version: - Driver for USB Flaps Switch - Driver for USB Trim Wheel - Driver for Motorized USB Trim Wheel - Lag in Heading Bug movement has been resolved. Now the Heading Bug on screen follows the physical Heading Bug directly and smoothly. - Several minor bugs have been resolved.	Size 1412 Kb
Driver15.zip USB Driver and INF file for the CCU and SIC (all versions). To be downloaded and saved in a known directory first, prior to installing the TRC Link Setup software. When connecting the CCU (1/2) or the SIC for the first time to your PC, the PC will ask for the INF file and system driver.	Size 14Kb
radiodriver13.zip USB Driver and INF file for the Radio Stack Controller. To be downloaded and saved in a known directory first, prior to installing the Radio Stack Setup software. When connecting the Radio Stack Controller for the first time to your PC, the PC will ask for the INF file and system driver.	Size 14Kb
TRCsetup37.zip TRC Link and Calibration Software, released 23 October 2007. This version will link with FSUIPC3.xx for Flight Simulator 2004 and with FSUIPC4.xx for Flight Simulator X.	Size 4,4Mb
Board Test Use this program to test the CCU controller board. This program only works when the TRClink Interface and Calibration software has been installed.	Size 56Kb
Latest version of the Radiostack driver software RSCsetup16.zip The latest Radio Stack Driver software, released at 10 November 2006.	Size 2,26Mb
Multicontroller 1_8.zip (version 1.8 - 10 April 2007) This updated software controls the Multi Controller Board and enables calibration of the connected instruments. It includes the software to program an identifier into the Multi Controller Board giving it a unique identification number which enables you to connect up to 32 Multi Controllers to a single PC. The software includes all Project Magenta Codes. The software is release at 10 April 2007. Some bugfixes are done to solve compatibility problems with FSUIPC4.	Size 2,33Mb
TRCsetup2244_13.zip Latest version of the TRC 2244 Link and Calibration Software. Now working with FSUIPC4 for Microsoft Flight Simulator FSX.	Size 3,5Mb